Join the thousands of Twin Troller owners who have had their boat delivered to their home.  Are you curious what to expect when your boat arrives?  You’ve come to the right place.  On this page you will find detailed photos and videos related to your Twin Troller X10 – The worlds best fishing boat’s arrival.

Arrival

Your boat will be delivered “Residential Delivery” via LTL carrier.  Residential Delivery is defined as getting the boat off the truck and onto your driveway at your address.  If you need assistance getting it into your garage, down a long drive, back yard, etc., you will need to make arrangements with friends to help.  If you have purchased the trailer, it is possible to load the boat onto the trailer from the ground using the hand crank on the trailer.  It is easy for most people, but be realistic with your capabilities.  If you have restricted access to your address, you may need to arrange pickup at shipping terminal, or meet driver at another location.

When your boat arrives it will be packed in a box approx. 10 feet long by 48 inches wide.  All of the Twin Troller X10 components will be inside this one box.

Box Contents

When you open the box, you’ll find your Twin Troller X10 along with three boxes and two seat supports.  Two of the boxes are your assembled seats with covers.

The other box contains:

  • Foot Pedals
  • (2) Swivel Bases Packets(including mounting hardware)

Attaching Your Seats


When your worlds best fishing boat arrives, the only assembly required will be attaching your seats to the support bars.  This process involves first mounting the swivel to the support bars, then attaching the swivel to your seat.  This is really easy to do and below you will find a video explaining the process.

Once you have finished this assembly, attaching your seats to the Twin Troller X10 is simply a matter of sliding them into the rails.

Installing Your Battery

We recommend you use a series 29 deep cycle marine battery for your Twin Troller X10.  You can buy one at your local marine dealer, or RV dealer.  You can also use a series 31 if you feel you need the extra run time.  Installing the battery requires you attach both red and black wires from both motors to the battery.  If you have a charger, attach those wires as well.  For a more detailed description of this process watch the videos below.

Pedal Installation

Pedal installation is a process you will do every time you take your Twin Troller X10 out on the water.  Calling this process “installation” makes it sound more difficult than the reality.  Installing your pedals is nothing more than plugging in the wire connections.  Make sure you plug the “right” motor cables into the “right” pedal, and the “left” motor cables into the “left” pedal.  Watch video below for detailed instructions.

With its best in class hull construction, storing your boat outside is not a problem.  Store your pedals in a clean dry location and your Twin Troller will provide years of reliable service.

We’re Done!

It’s just that easy, from the box to water ready in 15 minutes.  Visit our video section for more information on the Twin Troller or go to our online store to order yours today.

If you would like a detailed walk through of the process just provided watch the video below.  We’ve also included a video of some additional items you may want to get.  Have fun with the worlds best fishing boat!

Twin Troller X10 Arrival – Short Version

Twin Troller X10 Arrival – Long / Detailed Version

Additional Items You May Want